Welcome to the GARTENMETALL® online shop

Exterior in stainless steel look.Square cross-sectionHeight: 740 mmWidth: 345 mmDepth: 345 mmWith holes in the base area for good oxygen supplyWhen setting up Corten steel objects on patio slabs, we recommend using coasters. (e.g. stainless steel coaster art. no. GA-161342-0390-0390 see sample pictures).incl. shipping + packaging costs by parcel service within Germany Important safety instructions for the use of the fire objects can be found at www.gartenmetall.deManufactured under the trademark licence of VfB Stuttgart 1893 AG

Quality S355J2W+NMaterial no. 1.8965Motif: GRÄSER2Left and right sides folded in a C-shapeUpper and lower sides folded in an L-shapeHeight: 1,800 mmWidth: 1,000 mmDepth: 50 mmSurface on visible sides (only front side) optically pre-rusted

Quality S355J2W+NMaterial no. 1.8965Inner coating Water trough with high-quality, elastic, UV-stable, black and waterproof Garden Metal® plastic coating for clear waterShape: SemicircularHeight: 1,200 mmDiameter: ø950 mmDepth: 575 mmVolume: approx. 500 litreswith lid with stainless steel handleincl. water tap Brass solid front centreHeight outlet water tap: approx. 300 mmWater inlet for rainwater, left, top, IG3/4" for rainwater collector (on-site)OPTIONAL:Pressure increase at the water tap to enable the use of a garden hose with the rainwater (Art. No. GA-190016-M04)Foundation: on-siteSurface on the visible sides visually pre-rustedWith rain barrels made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust separation can run off in a defined manner.

Quality S355J2W+NMaterial no. 1.8965Height of door leaf: 1,800 mmInstallation recommendation: 100 mm above floorInstallation height: 1,900 mmPassage width: 1,014 mmWidth of door: 1,000 mmThickness of door leaf: 60 mmInstallation variant A"Door leaf between two posts"Delivery includes support post for setting in concrete. Retaining post for setting in concreteCross-section: 80x80 mmTotal length 2,380 mm, of which approx. 480 mm in the floorCorners roundedConnections for hinge or striking plate prepared in retaining post to fit PORTA garden doorDoor leafC-shaped bevelled on all sidesDoor leaf closed incl. stapled rear side stapled backBack identical to frontOpening direction: door DIN rightDoor stop (hinges): insideStrike plate with rubber buffer cushioned.with lock case galvanisedLock cylinder on siteDoor fitting and handle set in stainless steelNote: If a handle set with knob is ordered, an electric door opener (Art. No. GA-59 00 76) must also be ordered.Surface Visible surfaces optically pre-rustedIn the case of garden doors made of Corten steel, a certain amount of rust detachment of 0.05 mm of the surface may occur, particularly in the first few years. Plan the installation in such a way that this rust detachment can run off in a defined manner.

for the private gardenMaterial of base: Corten steel S355J2W+NMaterial no.: 1.8965Visible sides optically pre-rustedMaterial of seat: Natural fibre compound RESYSTA®, 20x70 mm, ergonomically shaped screwed from belowLength: 1.500 mmWidth: 630 mmHeight of backrest: 820 mmHeight of seat recess: 220 mmWith Corten steel, a certain amount of rust peeling of 0.05 mm of the surface occurs, especially in the first few years. The installation should be planned in such a way that this rust separation can run off in a defined manner.

Quality S355J2W+NMaterial no. 1.8965Surface optically pre-rusted on the visible sidesWith water troughs made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation so that this rust can run off in a defined manner.RectangularLength: 2.000 mmWidth: 500 mmHeight: 500 mmTop edge of water trough 60 mm wide, angled 20 mm inwardsInterior coating Water trough with high-quality, elastic, UV-stable, black and waterproof Gartenmetall® plastic coatingPrepare pump position:- in water trough (variant A)Connection prepared for water wallPosition: long side in the centreincl. 2x universal feed-through with cover, positions: 1x side wall, long side centrally, 1x base, front rightwith 2x sealing covers (Art. No. GA-220076)Water trough supplied in one piece all corners and edges rounded, welded and ground flatWater edge approx. 50 mm below OKFoundation: on sitewith 1x water wall AQUA LINEA 600 Height: 1.100 mmWidth: 1,000 mmDepth: 180 mmNote: for trough height 500 mmincl. water chute ISAR centrallyWidth of water chute: 600 mmOverhang: 45 mmHeight above water: 300 mmMaterial of water chute Stainless steel Material no. 1.4571, V4A, ground K320incl. removable inspection opening at the rearincl. water pump with ceramic shaftHousing PVC black, Spiral hose ø25 mm black, incl. suitable screw connectionswith Schuco plug to plug inPump capacity max. 5,000 l/h, 220 V connection, 10 m cablePrepared for connection to water trough.For description of position, see water troughAll corners and edges rounded, welded and ground flatWater pump note:The water pump is not frost-proof and must therefore be protected from frost in winter.

Quality S355J2W+NMaterial no. 1.8965Total length: 2,175 mm*)Depth: 730 mm*)*) incl. worktop overhang on all sides approx. 40 mmHeight of worktop: 890 mmconsisting of...1x base cabinet IBIZA for gas barbecue BEEFEATER S1600 with 4 burners (Art. No. GA-460324-0823)Cabinet module, front with hinged doors, adjustable feet, integrated rear panel and ventilation slots, without side skirting boardsWidth: 823 mmHeight: approx. 860 mmDepth: 650 mmDimensions of hinged doors:Width: 2x 361 mmHeight: 490 mm1x IBIZA Module 600 base unit (Art. No. GA-460322-0600)Cabinet module, front with hinged doors, adjustable feet and integrated rear panelWidth: 600 mmHeight: approx. 860 mmDepth: 650 mm1x IBIZA base cabinet module for outdoor refrigerator (Art. No. GA-460330-0675)Cabinet module with adjustable feet and integrated rear panelsuitable for BEEFEATER Qutdoor refrigerator with two doorsWidth: 675 mmDepth: 650 mmHeight: 860 mm1x Gas grill BEEFEATER S1600 with 4 burners (Art. No. GA-461376-05)Material: stainless steel, polished surfaceProfessional gas grill with cooking bonnet and thermometer with 4 powerful stainless steel burnersIntuitive operation from the front - incl. control panel cover. Control panel coverBurner output: 16.0 kW/hInstallation dimensions:Length: 823 mmDepth: 555 mmHeight: 517 (CLOSED) - 910 (OPEN) mmElectronic battery ignition with flame failure safety deviceIncludes a high-quality cast-iron grill grate, incl. a grill plate and a warming rack. With removable grease drip tray. Practically all elements can be cleaned in a normal dishwasher. All grill surface elements are made of cast iron and thus support even and rapid heatingtotal 1.355 running metres Kitchen worktop Black granite "NERO ASSOLUTO" (Art. No. GA-482289-030-730)Edge surfaces polishedEdges and corners chamferedThickness: 30 mmDepth: 730 mmLength: 1x 715 mm & 1x 640 mm1x Outdoor refrigerator for garden kitchen IBIZA (Art. No. GA-460027-01)with lockable glass doorbrushed stainless steel frame and stylish LED lightingWidth: 555 mmDepth: 520 mmHeight: 840 mmVolume: 118 litresConnection: 230 V (without Schuko plug)1x built-in stainless steel sink and water tap (Art. No. GA-481371-R450), round ø450 mm, depth approx. 180 mm. incl. cut-out in the worktop1x Set of side skirting boards for IBIZA garden kitchen (Art. No. GA-460336-050-0550)Set of side skirting boards flush with side wallScope of delivery: 2 piecesHeight: 50 mmLength: 596 mm1x Weather protection cover (Art. No. GA-460076-01-20)1x Connecting set for base unit (Art. No. GA-461382-M6) and short drill (Art. No. GA-461389-D6)In the case of garden objects made of Corten steel, a certain amount of rust peeling of 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust detachment can run off in a defined manner.

Grade S355J2W+NMaterial No. 1.8965SquareWidth: 1,320 mmLength: 1,320 mmHeight: 450 mmwith all-round rim 60 mm / 20 mmincl. inserted grill ring12 mm below OKMaterial: 8 mm, steelInner diameter: ø600 mmShell: boiler steel, 3 mmShell diameter: ø1.000 mmwelded from belowincl. hinged door with hinge system, stainless steel handle and safety rope - without perforated gridNote: Perforated grid in the side door possible at extra cost. Then, however, not very suitable for use as a pizza oven.Optional at extra cost: thermometer in the hinged door below the handleSpace for storing e.g. barbecue utensils etc. under the fireplace. In the round version, the opening of the side door is not large enough to allow the grill grate to be stored under the fire bowl.Surface optically pre-rustedWhen setting up on patio slabs, we recommend the use of trivets to prevent grate staining.Important safety instructions for the use of the fire objects can be found at www.gartenmetall.deNote on heat deformation:Due to the material, the grill surface may deform when the grill rings are placed on top. At very high grill temperatures, a permanent deformation may also form. This deformation is due to the material and is a known property of the grill rings.

Quality S355J2W+NMaterial No. 1.8965Spring fountain with noble water bowl WITHOUT OVERFLOWDelivery completely functional incl. water collection bowl, pump, matching hoses, fittings and LED lighting at the water outlet.Material of bowl: Corten steelDesign: FLATDiameter: ø1,000 mmHeight: 110 mmWater capacity approx. 40 litresTop edge of water approx. 20 mm below the top of the water bowlIncl. Base part for setting up the water bowl: the round geometry makes it easy and practical to align the water bowl.Pump capacity: 2,000 l/hfor installation in the water collection basin220 V power connection with 10 m cable and Schuko plug (type CEE /4), colour black, plastic, incl. connection material for spiral hose 1" (ø25 mm)LED source lighting incl. power supply unit and supply cable. Beam angle 180°. Protection class IP68, protection class power supply unit: IP 44. Voltage 12V/AC, power 1.6 Watt, power connection 220 V with 10 m cable and safety plug (type CEE 7/4). Light colour warm white.The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover that is supplied with the water collection basin and is included in the scope of delivery.Material of water collection basin: GRP plastic Material of cover: GRP plasticDiameter: ø 1,000 mm - of which approx. 90 mm rim all aroundHeight: approx. 350 mmWater capacity max. 275 litresDue to storage, there may be scratch marks in the bowl, which do not affect the stability and function.Surface on the visible sides visually pre-rustedNote Rust detachment of the bowl:Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer has formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.

Quality S355J2W+NMaterial no. 1.8965Surface optically pre-rusted on the outsideDimensions of bath barrel:Inner diameter: ø1,690 mmOuter diameter with rim: ø1.820 mmHeight: 950 mmWater volume: approx. 1,150 litres (at 80% filling without people)Bevelling at the top edge/basin rim towards the outside: 70 mmRim for placing glasses etc.made of waterproof curved RESYSTA in wood look 70x20 mm²Bathtub is completely coated on the inside with a high-quality, elastic, UV-stable, black and waterproof Garden Metal® plastic coatingwith integrated benchSeat height: 350 mmwith slightly sloping backrest for a comfortable sitting positionSpace for up to 3 peoplewith 1x underwater wood-burning stove with wood loading from aboveWeight stove: approx. 40 kgMaterial: stainless steel 1.4404Power: up to 30 KW (in 1 hour the bath water can be heated up to 10 C°, depending on the outside temperature, circulation and firing)The stove can be removed for cleaning. Chimney height: 2 m, of which 1 m with chimney protectionSeparation of the stove-seating area with 2x curved RESYSTA strips in wood look 140x20 mm² to protect against direct contact with the underwater wood stoveSupplied with 1x universal connection with sealing cap; e.g. as a cable feed-through for a circulation pump or lighting. This is located under the bench.Supplied with drain connection near the floor with internal thread 1". A drain hose could be connected there. Height of residual water approx. 20 mm. Note: The lowest residual water could be emptied with a water suction device or by tilting the complete bath tub.Incl. inspection opening for access under the bench in the area of the universal connection and the drain connection. Note: the area under the bench can be used as an installation space for lighting, water bubbler, circulation pump, storage space for the drain hose, etc.Foundation: on-siteCorten steel will show a certain amount of surface rust detachment of 0.05 mm, especially in the first few years. The installation must be planned in such a way that this rust separation can run off in a defined manner.NOTES:Unfortunately, water treatment with chlorine is not possible, as the underwater wood stove made of stainless steel is not permanently resistant to chlorine.Depending on the region or federal state, a permit is required for traditional wood firing, or there are different guidelines, such as minimum distances from the nearest window on the house. Please be sure to inform yourself in advance!MORE PRICE OPTIONS:- 12V pump, for installation under the bench for better water redistribution. Rated capacity: 6,000 l/h. (Art.No.: GA-22 00 36-06000-12)- Floor-level drain in the floor area made of stainless steel with sealing cap. Residual water height approx. 3 mm. (Art.Nr.: GA-22 13 73)- Step platform for easier access to the bath tub with steps made of curved RESYSTA in wood look. (Art.No.: GA-25 XX 48-00-0600)- Cover to protect against dirt, leaves, insects. (Art.no.: GA-25 00 46-01)- Further accessories/ drink holders etc. available on request or according to list.