AQUA LINEA water trough set with inlet pipe and pump
These are packing dimensions
Available, delivery time: 21-28 Tage
Material no. 1.8965
Surface optically pre-rusted on the visible sides
With water troughs made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation so that this rust can run off in a defined manner.
Rectangular
Length: 2.000 mm
Width: 500 mm
Height: 500 mm
Top edge of water trough 60 mm wide, edged 20 mm inwards
Interior coating Water trough with high-quality, elastic, UV-stable, black and waterproof
Prepare pump position:
- in water trough (variant A)
Connection prepared for inlet pipe
Position: short side centrally
incl. 2x universal feed-through with cover, positions: 1x base, rear, left, 1x base, front right
Delivery of water trough in one piece
all corners and edges rounded, welded and ground flat
Water edge approx. 50 mm below OK
Foundation: on site
with 1x cable entry element (Art. No. GA-220028)
with 1x sealing cover (Art. No. GA-220076)
with 1x pond pump 2.000l/h (Art. No. GA-220024)
for installation in the water trough
Power connection 220 V
with 10 m cable and safety plug
(type CEE /4)
32 Watt
Make PONTEC
incl. connection material for spiral hose 1. Connection material for spiral hose 1" (ø25 mm)
with 1x fountain inlet pipe RAURIS ø34mm - bent
Material no.:1.4301, V2A
surface ground K320
for installation at the pool edge
height: 400 mm
length 1: 300 mm
connection 1" internal thread
delivery incl. cover rosette ø60 mm and connection fitting for spiral hose 1" (ø25 mm).
for drilling at the pool edge ø42 mm
Material: | Corten steel |
---|
Login