AQUA LUND hot tub with bench and integrated wood-burning stove
Product number:
GA-250340-1650-01
These are packing dimensions
Available, delivery time: 21-28 Tage
matching Accessories
The following products can be directly added separately to the shopping cart
Product information "AQUA LUND hot tub with bench and integrated wood-burning stove"
Quality S355J2W+N
Material no. 1.8965
Surface optically pre-rusted on the outside
Dimensions of bath barrel:
Inner diameter: ø1,690 mm
Outer diameter with rim: ø1.820 mm
Height: 950 mm
Water volume: approx. 1,150 litres (at 80% filling without people)
Bevelling at the top edge/basin rim towards the outside: 70 mm
Rim for placing glasses etc.
made of waterproof curved RESYSTA in wood look 70x20 mm²
Bathtub is completely coated on the inside with a high-quality, elastic, UV-stable, black and waterproof Garden Metal®plastic coating
with integrated bench
Seat height: 350 mm
with slightly sloping backrest for a comfortable sitting position
Space for up to 3 people
with 1x underwater wood-burning stove with wood loading from above
Weight stove: approx. 40 kg
Material: stainless steel 1.4404
Power: up to 30 KW
(in 1 hour the bath water can be heated up to 10 C°, depending on the outside temperature, circulation and firing)
The stove can be removed for cleaning.
Chimney height: 2 m, of which 1 m with chimney protection
Separation of the stove-seating area with 2x curved RESYSTA strips in wood look 140x20 mm² to protect against direct contact with the underwater wood stove
Supplied with 1x universal connection with sealing cap; e.g. as a cable feed-through for a circulation pump or lighting. This is located under the bench.
Supplied with drain connection near the floor with internal thread 1". A drain hose could be connected there. Height of residual water approx. 20 mm. Note: The lowest residual water could be emptied with a water suction device or by tilting the complete bath tub.
Incl. inspection opening for access under the bench in the area of the universal connection and the drain connection. Note: the area under the bench can be used as an installation space for lighting, water bubbler, circulation pump, storage space for the drain hose, etc.
Foundation: on-site
Corten steel will show a certain amount of surface rust detachment of 0.05 mm, especially in the first few years. The installation must be planned in such a way that this rust separation can run off in a defined manner.
NOTES:
Unfortunately, water treatment with chlorine is not possible, as the underwater wood stove made of stainless steel is not permanently resistant to chlorine.
Depending on the region or federal state, a permit is required for traditional wood firing, or there are different guidelines, such as minimum distances from the nearest window on the house. Please be sure to inform yourself in advance!
MORE PRICE OPTIONS:
- 12V pump, for installation under the bench for better water redistribution. Rated capacity: 6,000 l/h. (Art.No.: GA-22 00 36-06000-12)
- Floor-level drain in the floor area made of stainless steel with sealing cap. Residual water height approx. 3 mm. (Art.Nr.: GA-22 13 73)
- Step platform for easier access to the bath tub with steps made of curved RESYSTA in wood look. (Art.No.: GA-25 XX 48-00-0600)
- Cover to protect against dirt, leaves, insects. (Art.no.: GA-25 00 46-01)
- Further accessories/ drink holders etc. available on request or according to list.
Material no. 1.8965
Surface optically pre-rusted on the outside
Dimensions of bath barrel:
Inner diameter: ø1,690 mm
Outer diameter with rim: ø1.820 mm
Height: 950 mm
Water volume: approx. 1,150 litres (at 80% filling without people)
Bevelling at the top edge/basin rim towards the outside: 70 mm
Rim for placing glasses etc.
made of waterproof curved RESYSTA in wood look 70x20 mm²
Bathtub is completely coated on the inside with a high-quality, elastic, UV-stable, black and waterproof Garden Metal®
with integrated bench
Seat height: 350 mm
with slightly sloping backrest for a comfortable sitting position
Space for up to 3 people
with 1x underwater wood-burning stove with wood loading from above
Weight stove: approx. 40 kg
Material: stainless steel 1.4404
Power: up to 30 KW
(in 1 hour the bath water can be heated up to 10 C°, depending on the outside temperature, circulation and firing)
The stove can be removed for cleaning.
Chimney height: 2 m, of which 1 m with chimney protection
Separation of the stove-seating area with 2x curved RESYSTA strips in wood look 140x20 mm² to protect against direct contact with the underwater wood stove
Supplied with 1x universal connection with sealing cap; e.g. as a cable feed-through for a circulation pump or lighting. This is located under the bench.
Supplied with drain connection near the floor with internal thread 1". A drain hose could be connected there. Height of residual water approx. 20 mm. Note: The lowest residual water could be emptied with a water suction device or by tilting the complete bath tub.
Incl. inspection opening for access under the bench in the area of the universal connection and the drain connection. Note: the area under the bench can be used as an installation space for lighting, water bubbler, circulation pump, storage space for the drain hose, etc.
Foundation: on-site
Corten steel will show a certain amount of surface rust detachment of 0.05 mm, especially in the first few years. The installation must be planned in such a way that this rust separation can run off in a defined manner.
NOTES:
Unfortunately, water treatment with chlorine is not possible, as the underwater wood stove made of stainless steel is not permanently resistant to chlorine.
Depending on the region or federal state, a permit is required for traditional wood firing, or there are different guidelines, such as minimum distances from the nearest window on the house. Please be sure to inform yourself in advance!
MORE PRICE OPTIONS:
- 12V pump, for installation under the bench for better water redistribution. Rated capacity: 6,000 l/h. (Art.No.: GA-22 00 36-06000-12)
- Floor-level drain in the floor area made of stainless steel with sealing cap. Residual water height approx. 3 mm. (Art.Nr.: GA-22 13 73)
- Step platform for easier access to the bath tub with steps made of curved RESYSTA in wood look. (Art.No.: GA-25 XX 48-00-0600)
- Cover to protect against dirt, leaves, insects. (Art.no.: GA-25 00 46-01)
- Further accessories/ drink holders etc. available on request or according to list.
detail.tabsContentTitle
| Format: | 2-3 persons (Ø1690) |
|---|---|
| Material: | Corten steel |
| Mixed: | Hot tub with bench and underwater wood stove |
Login
October 14, 2024 12:44
Sehr schön und elegant im Garten
Gibt optisch im Gegensatz zu den vielen im Internet erhältlichen Holzfässern echt was her. Hatte es nach knapp 2,5 Stunden mollig warm im Wasser.
Stairway platform AQUA LUND for boarding with RESYSTA
Nr. GA-250348-00-0600
Quality S355J2W+NMaterial no. 1.8965Surface optically pre-rustedWidth: 600 mmwith two stepsStep height: 2x 180 mmStep: 240 mmwith 3x bent RESYSTA 70x20 mm² as stepfor attaching to the AQUA LUND bath tubParticularly in the first few years, a certain amount of rust detachment of 0.05 mm occurs on the surface of corten steel. The installation must be planned in such a way that this rust separation can run off in a defined manner.
Cover for bath barrel AQUA LUND
Nr. GA-250046-01-1650
suitable for bath barrel AQUA LUNDInner diameter: ø1,690 mmOuter diameter: ø1,820 mmMaterial: PVC, reinforcedColour: greyWeight: approx. 400 g/m² (high-quality truck tarpaulin quality)incl. fastening eyelets or tabs and rubber tensioner. -Tabs and rubber tensionerColour: greyto protect against dirt, leaves, insects, etc.Note: For the variant with integrated underwater wood stove, the clip-on chimney must be removed before installing the tarpaulin.