Bench type DRESDEN 2.0 m
Product number:
UW-127-03-55-2000
These are packing dimensions
Is produced for you, delivery time 21-28 Tage
Product information "Bench type DRESDEN 2.0 m"
Bench with 27 seat support strips lengthwise
with ergonomically shaped seat
Bench dimensions
Length: 2,000 mm
Seat depth: 640 mm
Seat height: approx. 475 mm
Bench substructure material:
Corten steel: grade S355J2W + N,
Material no. 1.8965
Front sides faced from both sides 3 mm
No screws visible from the front
Visible sides optically pre-rusted
Material seat support
RESYSTA® , cross-section 30x30 mm
Surface natural, sanded
The seat supports are screwed from below so that no fastening screws are visible from above.
Fastening of the bench to the ground: on site with prepared lugs on the ground
Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.
with ergonomically shaped seat
Bench dimensions
Length: 2,000 mm
Seat depth: 640 mm
Seat height: approx. 475 mm
Bench substructure material:
Corten steel: grade S355J2W + N,
Material no. 1.8965
Front sides faced from both sides 3 mm
No screws visible from the front
Visible sides optically pre-rusted
Material seat support
Surface natural, sanded
The seat supports are screwed from below so that no fastening screws are visible from above.
Fastening of the bench to the ground: on site with prepared lugs on the ground
Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.
detail.tabsContentTitle
| Format: | L2000 |
|---|---|
| Material: | Corten steel |
Login