Bench type HALLE ø3.0 m-180°

with clear and cubic solid substructure. All corners and edges are rounded.
(Note: substructure as type BERLIN straight)

Material substructure bench:
Corten steel grade S355J2W + N
Material no. 1.8965

Visible sides optically pre-rusted

Material seat support bench:
Metal plastic-coated, black
Edges chamfered

Dimensions bench:
Outer diameter: ø3.000 mm

Radius inner edge: R1.040 mm
Length inner edge: 3.266 mm

Radius outer edge: R1,500 mm
Length outer edge: 4,710 mm

Seat depth: 460 mm
Seat height: 475 mm

Opening angle 180°

Seat support crosswise

Seat bar trapezoidal, height 65 mm

The seat supports QUER are protruding forwards and backwards approx. they are screwed to the substructure from below so that no fastening screws are visible from above. All screws are of high-quality A2 stainless steel.

Optional:
Fastening of the bench prepared for screwing to the floor, e.g. on a concrete base. Lugs are welded to the side of the bench for this purpose. Hole diameter ø14 mm, e.g. for M12 screws. Fixing material to be provided by the customer.
Surcharge (Art. No. UW-472-00-02)

Foundation: to be provided by the customer

Corten steel with a stainless steel look will show a certain amount of rust removal of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and no discolouration occurs in the area of the objects.