Bench series Type KOBLENZ ø3,0 m-180°

Round bench with conical solid backrest and conical solid substructure for more legroom in the seating area

Material substructure and backrest:
Corten steel grade S355J2W + N
Material no. 1.8965

Visible sides optically pre-rusted

Material seat and backrest:
RESYSTA®, edges chamfered

Dimensions bench:
Outer diameter: ø3.000 mm

Radius front edge: R1.500 mm
Length front edge: 4,710 mm

Seat depth: 400 mm
Seat height: 475 mm
Inclination under seat approx. 15° inwards

Opening angle 180°

Seat support radial 5x 20x70 mm

Continuous backrest
Height: approx. 350 mm
Inclination of backrest approx. 20°

Vertical planking: 20x70 mm

The seat supports are screwed from below with a stainless steel crossbar so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2

Optional:
Fixing of the bench prepared for screwing to the floor, e.g. on a concrete base. Lugs are welded to the side of the bench for this purpose. Hole diameter ø14 mm, e.g. for M12 screws. Fixing material to be provided by the customer.
Surcharge (Art. No. UW-472-00-02)

Corten steel with a stainless steel look will show some rust peeling of 0.05 mm on the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.