Bench type FEET ø3.0m - 180°
Product number:
UW-260-03-52-D3000
These are packing dimensions
Is produced for you, delivery time 21-28 Tage
Product information "Bench type FEET ø3.0m - 180°"
Note: Substructure as type KEMPTEN straight
Simple metal side panel. Thickness 10 mm. No direct screw connection of the seat supports visible from above.
Material of bench substructure:
Corten steel grade S355J2W + N
Material no. 1.8965
Visible sides optically pre-rusted
Material seat support bench:
RESYSTA® , edges chamfered
Dimensions bench:
Outer diameter: ø3.050 mm
Radius inner edge: R1.069 mm
Length inner edge: 3.357 mm
Radius outer edge: R1.525 mm
Length outer edge: 4.789 mm
Seat depth: 456 mm
Seat height: 475 mm
Division of support cheeks:
one support cheek every 45°
Opening angle 180°
Seat support radial
5 seat beams 20x70 mm
Distance approx. 14 mm
Lateral seat support
2 seat beams 140x20 mm
The seat supports are screwed to a stainless steel crossbar from below so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2
Fastening of the bench: Own weight
Foundation: on site
Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend that you plan the installation in such a way that this rust can run off in a defined manner and that there is no discolouration in the area of the objects.
Simple metal side panel. Thickness 10 mm. No direct screw connection of the seat supports visible from above.
Material of bench substructure:
Corten steel grade S355J2W + N
Material no. 1.8965
Visible sides optically pre-rusted
Material seat support bench:
Dimensions bench:
Outer diameter: ø3.050 mm
Radius inner edge: R1.069 mm
Length inner edge: 3.357 mm
Radius outer edge: R1.525 mm
Length outer edge: 4.789 mm
Seat depth: 456 mm
Seat height: 475 mm
Division of support cheeks:
one support cheek every 45°
Opening angle 180°
Seat support radial
5 seat beams 20x70 mm
Distance approx. 14 mm
Lateral seat support
2 seat beams 140x20 mm
The seat supports are screwed to a stainless steel crossbar from below so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2
Fastening of the bench: Own weight
Foundation: on site
Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend that you plan the installation in such a way that this rust can run off in a defined manner and that there is no discolouration in the area of the objects.
detail.tabsContentTitle
| Format: | Ø3000 |
|---|---|
| Material: | Corten steel |
| Seat cushions: | RESYSTA H20xW70mm |
Login