Bench type FEET ø3.0m - 180°
Product number:
UW-260-19-96-D3000
Is produced for you, delivery time 28-35 Tage
Packing dimensions:
x x mm | 210 kg
Product information "Bench type FEET ø3.0m - 180°"
Note: Substructure as type KEMPTEN straight
Simple metal side panel. Thickness 10 mm. No direct screw connection of the seat supports visible from above.
Material substructure bench:
Surface coated on all sides with a high-quality and weatherproof 2-component primer and the visible surfaces painted to standard RAL 7016 colour anthracite grey, fine structure, matt.
(Special colours available at an extra charge)
Base material: Stainless steel
Seat support material Bench:
Metal plastic-coated, black
Edges chamfered
Dimensions Bench:
Outer diameter: ø3.050 mm
Radius inner edge: R1.069 mm
Length inner edge: 3.357 mm
Radius outer edge: R1.525 mm
Length outer edge: 4.789 mm
Seat depth: 456 mm
Seat height: 475 mm
Division of support cheeks:
one support cheek every 45°
Opening angle 180°
Seat support radial
2 seat beams 65x220 mm
Distance approx. 20 mm
The seat supports are screwed to a stainless steel crossbar from below so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2
Fastening of the bench: Own weight
Foundation: on site
Simple metal side panel. Thickness 10 mm. No direct screw connection of the seat supports visible from above.
Material substructure bench:
Surface coated on all sides with a high-quality and weatherproof 2-component primer and the visible surfaces painted to standard RAL 7016 colour anthracite grey, fine structure, matt.
(Special colours available at an extra charge)
Base material: Stainless steel
Seat support material Bench:
Metal plastic-coated, black
Edges chamfered
Dimensions Bench:
Outer diameter: ø3.050 mm
Radius inner edge: R1.069 mm
Length inner edge: 3.357 mm
Radius outer edge: R1.525 mm
Length outer edge: 4.789 mm
Seat depth: 456 mm
Seat height: 475 mm
Division of support cheeks:
one support cheek every 45°
Opening angle 180°
Seat support radial
2 seat beams 65x220 mm
Distance approx. 20 mm
The seat supports are screwed to a stainless steel crossbar from below so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2
Fastening of the bench: Own weight
Foundation: on site
Format: | Ø3000 |
---|---|
Material: | Colour coated |
Seat cushions: | Metal-plastic coated |
Login