Bench type LEIPZIG 2.0 m with seat support hardwood

The bench rests on a clear and solid cubic substructure. All corners and edges are rounded.

Material substructure bench:
Corten steel grade S355J2W + N
Material no. 1.8965

Visible sides optically pre-rusted

Material seat support bench:
100% hardwood with quality seal
Seat beams 65x65 mm
Distance approx. 20 mm
Edges chamfered

Dimensions bench:
Total length: 2.000 mm
Seat depth: 490 mm
Seat height: 475 mm

Seat support crosswise

Fastening of the bench: own weight

Without backrest
Without side rest

Foundation: on site

Corten steel in stainless steel look will show a certain rust detachment of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.

When combining wooden and corten steel seat cushions, the iron oxide adhering to the surface and the tannic acid present in the wood can cause dark grey and black discolouration of the wooden cushions. This is a natural process in this combination and does not justify a complaint. With increasing natural greying of the wood, the grey spots that appear in advance disappear and the surface colour becomes similar.

Care instructions for wood:
All wood used outdoors greys within a few months and takes on the typical silvery appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.gartenmetall.de