Bench type MAINZ 2.0 m with seat support hardwood
Product number:
UW-142-03-72-2000
Is produced for you, delivery time 28-35 Tage
Packing dimensions:
x x mm | 180 kg
Product information "Bench type MAINZ 2.0 m with seat support hardwood"
Bench with additional wooden side slats LENGTHS
Material of bench substructure:
Corten steel grade S355J2W + N
Material no. 1.8965
Visible sides optically pre-rusted
Material of bench seat support:
100% hardwood with seal of quality
6 pieces seat beams top 65x65 mm
5 pieces wooden side slats 65x65 mm
Distance approx. 18 mm
Edges chamfered
Dimensions bench:
Total length: 2,000 mm
Seat depth: 490 mm
Seat height: 475 mm
Seat support lengthwise
The seat supports are screwed together from below with a stainless steel cross batten so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2.
Without backrest
Without side rest
Fastening of the bench: Dead weight
Foundation: on site
Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.
When combining wooden and corten steel seat supports, the iron oxide adhering to the surface and the tannic acid present in the wood can cause dark grey and black discolouration of the wooden supports. This is a natural process in this combination and does not justify a complaint. With increasing natural greying of the wood, the grey spots that appear in advance disappear and the surface colour becomes similar.
Care instructions for wood:
All wood used outdoors greys within a few months and takes on the typical silvery appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.gartenmetall.de
Material of bench substructure:
Corten steel grade S355J2W + N
Material no. 1.8965
Visible sides optically pre-rusted
Material of bench seat support:
100% hardwood with seal of quality
6 pieces seat beams top 65x65 mm
5 pieces wooden side slats 65x65 mm
Distance approx. 18 mm
Edges chamfered
Dimensions bench:
Total length: 2,000 mm
Seat depth: 490 mm
Seat height: 475 mm
Seat support lengthwise
The seat supports are screwed together from below with a stainless steel cross batten so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2.
Without backrest
Without side rest
Fastening of the bench: Dead weight
Foundation: on site
Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.
When combining wooden and corten steel seat supports, the iron oxide adhering to the surface and the tannic acid present in the wood can cause dark grey and black discolouration of the wooden supports. This is a natural process in this combination and does not justify a complaint. With increasing natural greying of the wood, the grey spots that appear in advance disappear and the surface colour becomes similar.
Care instructions for wood:
All wood used outdoors greys within a few months and takes on the typical silvery appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.gartenmetall.de
| Format: | L2000 |
|---|---|
| Material: | Corten steel |
| Seat cushions: | Hardwood H65xW65mm |
Login