Bench type MAINZ 2.0 m with seat support hardwood

Bench with additional lateral wooden slats LENGTHS

Material substructure bench:
Steel hot-dip galvanised

Material seat support bench:
100% hardwood with quality seal
6 pieces seat beams top 65x65 mm
5 pieces lateral wooden slats 65x65 mm
Distance approx. 18 mm
Edges chamfered

Bench dimensions:
Total length: 2,000 mm
Seat depth: 490 mm
Seat height: 475 mm

Seat support lengthwise

The seat supports are screwed together from below with a stainless steel cross batten so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2.

Without backrest
Without side rest

Fastening of the bench: Dead weight

Foundation: on site

Note:
The main purpose of hot-dip galvanising is to provide technically high-quality and at the same time inexpensive corrosion protection. Requirements for the aesthetics of the surfaces are not defined. To avoid misunderstandings, we strongly recommend that garden objects that have to meet visual requirements are additionally or alternatively colour-coated. In general, hot-dip galvanised objects are subject to stress-related deformations as a result of the galvanising process. Rolled-in areas, cavities, scratches and other defects only become visible after hot-dip galvanising and are therefore excluded as grounds for complaint. Different shades of grey are also due to the process and cannot be ruled out.

Care instructions for wood:
All wood used outdoors turns grey within a few months and takes on the typical silver appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.urbanworks.de.