Bench type MAINZ 3.0 m with seat support hardwood

Bench with additional wooden side slats LENGTHS

Bench base material:
Corten steel grade S355J2W + N
Material no. 1.8965

Visible sides optically pre-rusted

Bench seat support material:
100% hardwood with quality seal
6 seat beams top 65x65 mm
5 wooden side slats 65x65 mm
Spacing approx. 18 mm
Edges chamfered

Dimensions bench:
Total length: 3,000 mm
Seat depth: 490 mm
Seat height: approx. 475 mm

Seat support lengthwise

The seat supports are screwed together from below with a stainless steel cross batten so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high quality stainless steel A2.

Without backrest
Without side rest

Fastening of the bench: Dead weight

Foundation: on site

Corten steel with a stainless steel look will show some rust peeling of 0.05 mm of the surface, especially in the first few years. We therefore recommend planning the installation in such a way that this rust detachment can run off in a defined manner and no discolouration occurs in the area of the objects.

When combining wooden and Corten steel seat covers, the iron oxide adhering to the surface and the tannic acid present in the wood can cause dark grey and black discolouration of the wooden covers. This is a natural process in this combination and does not justify a complaint. With increasing natural greying of the wood, the grey spots that appear in advance disappear and the surface colour becomes similar.

Care instructions for wood:
All wood used outdoors greys within a few months and takes on the typical silvery appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.gartenmetall.de