Bollard light AREZZO 900 in colour-coated stainless steel
Product number:
GA-421918-0900-140-70
These are packing dimensions
Is produced for you, delivery time 21-28 Tage
matching Accessories
The following products can be directly added separately to the shopping cart
1 x
1 x
Product information "Bollard light AREZZO 900 in colour-coated stainless steel"
AREZZO outdoor luminaire for pathway lighting.
Fixing to concrete floor for fixed dowelling or with ground spike in the ground.
Cross-section 140x70 mm. Head length 107 mm.
Power cable can be fed from below or behind.
Material: Surface powder-coated on all sides to RAL 7016, colour anthracite grey fine structure, matt
Base material: Stainless steel
Height: 900 mm
Width: 140 mm
Depth: 70 mm
Mounting:
Screw onto base plate (2 lugs left and right, each with 1x slotted hole 29x9 mm) or
Ground spike (Art. No. GA-42 03 29) into the ground (lamp must be screwed onto the spike with screws and nuts)
incl. bulb 24 SMD
LED 5 W, warm white, IP54
Luminous flux 430 lumen
Light angle 120°
Energy efficiency class A+
Consumption 1000h 5kWh
Order earth spike separately!
Note:
Connection on site by electrician only.
Fixing to concrete floor for fixed dowelling or with ground spike in the ground.
Cross-section 140x70 mm. Head length 107 mm.
Power cable can be fed from below or behind.
Material: Surface powder-coated on all sides to RAL 7016, colour anthracite grey fine structure, matt
Base material: Stainless steel
Height: 900 mm
Width: 140 mm
Depth: 70 mm
Mounting:
Screw onto base plate (2 lugs left and right, each with 1x slotted hole 29x9 mm) or
Ground spike (Art. No. GA-42 03 29) into the ground (lamp must be screwed onto the spike with screws and nuts)
incl. bulb 24 SMD
LED 5 W, warm white, IP54
Luminous flux 430 lumen
Light angle 120°
Energy efficiency class A+
Consumption 1000h 5kWh
Order earth spike separately!
Note:
Connection on site by electrician only.
detail.tabsContentTitle
| Format: | H900 |
|---|---|
| Material: | Colour coated |
Login
Erdspieß für Pollerleuchte COMO-AREZZO-FANO
Nr. GA-421329
Material: Edelstahl V2A
zur Befestigung der Außenleuchte COMO, AREZZO, SPLIT und Steckdosensäule FANO im Boden mit Grundplatte zum Einschlagen oder Einbetonieren.
Lieferung inkl. passender Befestigungsschrauben und Muttern in Edelstahl
Breite: 210 mm
Tiefe: 140 mm
Länge: 300 mm
Hinweis: Die Montage muss erfolgen, dass etwas Platz zwischen Auflagefläche und Boden bleibt, so dass die Befestigungsmuttern noch montiert werden können.
Ground spike for bollard light COMO-AREZZO-SPLIT-BARI galvanised
Nr. GA-421529
Material: steel, galvanisedfor fixing the outdoor luminaire COMO, AREZZO, SPLIT and BARI in the groundwith base plate for hammering in or setting in concrete.Supplied with matching fixing screws and nuts in stainless steelWidth: 210 mmDepth: 140 mmLength: 300 mmNote: Mounting must be carried out leaving some space between the support surface and the ground so that the fixing nuts can still be fitted.
Illuminant for bollard luminaires COMO or AREZZO
Nr. GA-420036
Light source: LED 5 W2900K, 24 SMD, 430 lm, EEK=A+Socket: GU10 base, light colour warm white
Plug set for COMO and AREZZO bollard light
Nr. GA-420024
for plug-in and simple connection to existing earth lines with little effort.Performance and scope of delivery:A device connection plug type WIELAND RST2013F with a cable extension of approx. 60 cm and the necessary protective earth conductor with ring lug for connection in the lamp housing is mounted ex works on the LED recessed luminaire supplied with the COMO and AREZZO lamps. On the earth cable side, the double plug for connecting the earth cables ø10-14 mm (supply and forwarding) is included in the scope of delivery.The installation of the plugs on the earth cable side is only permitted by a qualified electrician (240 V voltage).
Surcharge for motion sensor for bollard light COMO or AREZZO
Nr. GA-420026
Motion detector is provided in bollard light at the front above illuminantRange: 6 m Twilight sensitivity adjustable 10 to 2000 luxSwitch-on time: 5 s - 8 min. Working field: 120° / 360° (forwards away / vertical)Hole diameter: ø13 mmMotion sensor 230 V Connection by electrician necessary