Bollard light COMO 900 in stainless steel look
Product number:
GA-420316-0900-140-70
These are packing dimensions
Available, delivery time: 7-14 Tage
matching Accessories
The following products can be directly added separately to the shopping cart
Product information "Bollard light COMO 900 in stainless steel look"
Outdoor luminaire COMO for illuminating paths.
Fixing to concrete floor for fixed dowelling or with ground spike in the ground.
Cross-section 140x70 mm.
Power cable can be fed from below or behind.
Material: Corten steel
Grade S355J2W+N,
Material no. 1.8965
Height: 900 mm
Width: 140 mm
Depth: 70 mm
Mounting:
Screw onto base plate (2 lugs left and right, each with 1x slotted hole 29x9 mm) or
Drive earth spike (Art. no. (lamp must be screwed onto spike with screws and nuts)
incl. bulb 24 SMD
LED 5 W, warm white, IP54
Luminous flux 430 lumen
Light angle 120°
Energy efficiency class A+
Consumption 1000h 5kWh
Order earth spike separately!
Note:
Connection on site by electrician only.
Fixing to concrete floor for fixed dowelling or with ground spike in the ground.
Cross-section 140x70 mm.
Power cable can be fed from below or behind.
Material: Corten steel
Grade S355J2W+N,
Material no. 1.8965
Height: 900 mm
Width: 140 mm
Depth: 70 mm
Mounting:
Screw onto base plate (2 lugs left and right, each with 1x slotted hole 29x9 mm) or
Drive earth spike (Art. no. (lamp must be screwed onto spike with screws and nuts)
incl. bulb 24 SMD
LED 5 W, warm white, IP54
Luminous flux 430 lumen
Light angle 120°
Energy efficiency class A+
Consumption 1000h 5kWh
Order earth spike separately!
Note:
Connection on site by electrician only.
detail.tabsContentTitle
| Format: | H900 |
|---|---|
| Material: | Corten steel |
Login
14 October 2024 11:16
Cooles Design
Ausreichende Beleuchtung. Das mitgelieferte Befestigungszubehör erleichtert die Installation. Ich habe vier Stück für einen 10-Meter-Weg gewählt und bin sehr zufrieden.
Ground spike for bollard light COMO-AREZZO-SPLIT-BARI Corten
Nr. GA-420329
for mounting the outdoor luminaire COMO, AREZZO, SPLIT and BARI in the groundwith base plate for hammering in or setting in concrete.Supplied incl. matching fixing screws and nuts in stainless steelWidth: 210 mmDepth: 140 mmLength: 300 mmNote: Mounting must be carried out leaving some space between the support surface and the ground so that the fixing nuts can still be fitted.
Illuminant for bollard luminaires COMO or AREZZO
Nr. GA-420036
Light source: LED 5 W2900K, 24 SMD, 430 lm, EEK=A+Socket: GU10 base, light colour warm white
Plug set for COMO and AREZZO bollard light
Nr. GA-420024
for plug-in and simple connection to existing earth lines with little effort.Performance and scope of delivery:A device connection plug type WIELAND RST2013F with a cable extension of approx. 60 cm and the necessary protective earth conductor with ring lug for connection in the lamp housing is mounted ex works on the LED recessed luminaire supplied with the COMO and AREZZO lamps. On the earth cable side, the double plug for connecting the earth cables ø10-14 mm (supply and forwarding) is included in the scope of delivery.The installation of the plugs on the earth cable side is only permitted by a qualified electrician (240 V voltage).
Surcharge for motion sensor for bollard light COMO or AREZZO
Nr. GA-420026
Motion detector is provided in bollard light at the front above illuminantRange: 6 m Twilight sensitivity adjustable 10 to 2000 luxSwitch-on time: 5 s - 8 min. Working field: 120° / 360° (forwards away / vertical)Hole diameter: ø13 mmMotion sensor 230 V Connection by electrician necessary