Planter with bench FÖHR 3.0 m x 1.0 m with Kebony 25x118mm
Product number:
UW-185L-19-67-3000-1000
Is produced for you, delivery time 21-28 Tage
Packing dimensions:
x x mm | 300 kg
Product information "Planter with bench FÖHR 3.0 m x 1.0 m with Kebony 25x118mm"
Mobile planter with integrated bench
Material planter:
Surface coated on all sides with a high-quality and weatherproof 2-component primer and the visible surfaces painted to standard RAL 7016 colour anthracite grey, fine structure, matt.
(special colours available at extra cost)
Dimensions planter:
Rectangular with all-round folding at top 60 mm and 20 mm, for high stability and round edges
Length: 2.980 mm
Width: 1,000 mm
Height of planter: 500 mm
Height of bench: 475 mm
Height of planter: 25 mm higher than bench
Length of bench: 2,980 mm
Width of bench: 1.000 mm
Two benches forming a corner
Seat depth: 490 mm
Number of lugs: 4 pieces
Lugs for crane transport of the plant troughs and/or for fastening shrubs. The straps are welded into the corners approx. 100 mm below the top edge. Hole for hooks for hanging: ø40 mm.
Material seat support bench:
KEBONY
Edges chamfered
Dimensions seat bench:
Seat support lengthwise
Type SAL 25x118
4 pieces seat beams 25x118 mm
Distance approx. 6 mm
The seat supports are screwed from below with a cross lath made of stainless steel so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high-quality A2 stainless steel.
Without side rests
To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm of insulation made of PUR insulation boards.
Delivery includes base, water-permeable
Foundation: on-site
The seat supports are made of wood. Wood is a natural material that can vary in colour. The seat cushions are made exclusively from kiln-dried wood. Despite all care, drying cracks may occur and knots may be visible. These are natural characteristics and do not justify a complaint. Border samples can be matched on request.
Wood care instructions:
All wood used outdoors turns grey within a few months and takes on the typical silvery appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.gartenmetall.de
Material planter:
Surface coated on all sides with a high-quality and weatherproof 2-component primer and the visible surfaces painted to standard RAL 7016 colour anthracite grey, fine structure, matt.
(special colours available at extra cost)
Dimensions planter:
Rectangular with all-round folding at top 60 mm and 20 mm, for high stability and round edges
Length: 2.980 mm
Width: 1,000 mm
Height of planter: 500 mm
Height of bench: 475 mm
Height of planter: 25 mm higher than bench
Length of bench: 2,980 mm
Width of bench: 1.000 mm
Two benches forming a corner
Seat depth: 490 mm
Number of lugs: 4 pieces
Lugs for crane transport of the plant troughs and/or for fastening shrubs. The straps are welded into the corners approx. 100 mm below the top edge. Hole for hooks for hanging: ø40 mm.
Material seat support bench:
KEBONY
Edges chamfered
Dimensions seat bench:
Seat support lengthwise
Type SAL 25x118
4 pieces seat beams 25x118 mm
Distance approx. 6 mm
The seat supports are screwed from below with a cross lath made of stainless steel so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high-quality A2 stainless steel.
Without side rests
To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm of insulation made of PUR insulation boards.
Delivery includes base, water-permeable
Foundation: on-site
The seat supports are made of wood. Wood is a natural material that can vary in colour. The seat cushions are made exclusively from kiln-dried wood. Despite all care, drying cracks may occur and knots may be visible. These are natural characteristics and do not justify a complaint. Border samples can be matched on request.
Wood care instructions:
All wood used outdoors turns grey within a few months and takes on the typical silvery appearance. It is possible to oil the wood with suitable wood preservative oil so that the greying of the wood is delayed. You can find more information on this on our homepage at www.gartenmetall.de
| Format: | L3000 x B1000 |
|---|---|
| Material: | Colour coated |
| Seat cushions: | KEBONY H22xW120mm |
Login