Planter with bench FÖHR 3.0 m x 1.0 m with RESYSTA® 20x70mm

Mobile plant trough with integrated bench

Plant trough material:
Grade S355J2W + N
Material no. 1.8965

Visible sides optically pre-rusted

Plant trough dimensions:
Rectangular with all-round bevelling at top 60 mm and 20 mm, for high stability and round edges

Length: 2,980 mm
Width: 1.000 mm
Height of planter trough: 500 mm

Height of bench: 475 mm
Height of planter trough: 25 mm higher than bench
Length of bench: 2,980 mm
Width of bench: 1,000 mm
Two benches forming a corner
Seat depth: 490 mm

Number of straps: 4 pieces
Straps for crane transport of planter troughs and/or for fastening shrubs. The straps are welded into the corners approx. 100 mm below the top edge. Hole for hooks for hanging: ø40 mm.

Material seat support:
RESYSTA®
Edges chamfered

Dimensions seat bench:
Seat support lengthwise
Type SAL 6x20x70
6 seat beams 20x70 mm
Spacing approx. 14 mm

The seat supports are screwed together from below with a stainless steel crossbar so that no fastening screws are visible from above. The complete pre-assembled seat support is then screwed onto the bench substructure with screws between the seat supports. All screws are of high-quality A2 stainless steel.

Without side rests

To protect the roots from frost and heat damage, we recommend lining the walls with at least 20 mm of insulation made of PUR insulation boards.

Delivery includes base, water-permeable

Foundation: to be provided by the customer

With corten steel in a stainless steel look, a certain amount of rust detachment of 0.05 mm of the surface occurs, especially in the first few years. We therefore recommend planning the installation in such a way that this rust separation can run off in a defined manner and that there is no discolouration in the area of the objects.