Planting ring RONDA ø2400 MASSIVE
Product number:
GA-911510-05-0490-D2400
These are packing dimensions
Is produced for you, delivery time 21-28 Tage
matching Accessories
The following products can be directly added separately to the shopping cart
Product information "Planting ring RONDA ø2400 MASSIVE"
Steel S235JR, material no. 1.0038
Diameter: ø2,400 mm
Height: 490 mm
Planting ring supplied in one piece
System elements joined evenly and without gaps
Due to design, approx. 200 mm radius not available or only approximate radius in the area of the seam or joint. only approximate radius
without base
Depending on the height and diameter, we reserve the right to weld in a reinforcing ring and/or reinforcing cross struts on the inside
Foundation: on-site
Note:
The main purpose of hot-dip galvanising is to provide technically high-quality and at the same time inexpensive corrosion protection. Requirements for the aesthetics of the surfaces are not defined. To avoid misunderstandings, we strongly recommend that garden objects that have to meet visual requirements are additionally or alternatively colour-coated. Basically, hot-dip galvanised objects are subject to stress-related deformations as a result of the galvanising process. Rolling in, shrinkage, scratches and other defects only become visible after hot-dip galvanising and are therefore excluded as grounds for complaint. Different grey colouring is also due to the process and cannot be ruled out.
Diameter: ø2,400 mm
Height: 490 mm
Planting ring supplied in one piece
System elements joined evenly and without gaps
Due to design, approx. 200 mm radius not available or only approximate radius in the area of the seam or joint. only approximate radius
without base
Depending on the height and diameter, we reserve the right to weld in a reinforcing ring and/or reinforcing cross struts on the inside
Foundation: on-site
Note:
The main purpose of hot-dip galvanising is to provide technically high-quality and at the same time inexpensive corrosion protection. Requirements for the aesthetics of the surfaces are not defined. To avoid misunderstandings, we strongly recommend that garden objects that have to meet visual requirements are additionally or alternatively colour-coated. Basically, hot-dip galvanised objects are subject to stress-related deformations as a result of the galvanising process. Rolling in, shrinkage, scratches and other defects only become visible after hot-dip galvanising and are therefore excluded as grounds for complaint. Different grey colouring is also due to the process and cannot be ruled out.
detail.tabsContentTitle
| Format: | S5xH490xØ2400 |
|---|---|
| Material: | Hot-dip galvanised |
Login
Root INSULATION PLATE 20 mm
Nr. GA-160051-1250-0600
Material: Extruded polystyrene rigid foam (XPS)Closed-cell and pressure-resistantTo protect against root damage caused by heat and frostThermal conductivity 0.035 W/(m-K)Dimensions of panels:Length: 1,250 mmWidth: 600 mmThickness: 20 mmCutting to size and installation to be done on site