ROST-PROTECT® 490 ml
Product number:
GA-640038-0500
These are packing dimensions
Is produced for you, delivery time 2-7 Tage
Product information "ROST-PROTECT® 490 ml"
to protect the rust layer of corten steel
Quantity: 490 ml
Air-drying, colourless natural oil with a high solids content, which is applied to the finished rust layer and seals it. The rust protection penetrates into the "deepest" pores of the open-pored rust surface and works from there.
The product is applied undiluted with a brush, roller or atomiser to a grease-free, clean and dry surface. Avoid direct sunlight.
Drying time: Dust-dry after 6 to 8 hours, fully dry after 12 to 24 hours. Further coats can be applied as required.
As with oiling and maintaining wood products, the coating must be checked regularly and, if necessary, the coating reapplied or supplemented depending on the weathering. This is the case when the surface no longer appears uniformly satin-matt.
It is suitable for application primarily on absorbent substrates. We do not recommend the application on bare sheet metal surfaces. The product is not suitable for use in areas constantly exposed to water (in well interiors).
The processing temperature should be between +5°C to +35°C.
Yield:
depending on the degree of rust 4 to 10 m² / litre.
The safety instructions and application instructions on the packaging and our product information must be observed.
Quantity: 490 ml
Air-drying, colourless natural oil with a high solids content, which is applied to the finished rust layer and seals it. The rust protection penetrates into the "deepest" pores of the open-pored rust surface and works from there.
The product is applied undiluted with a brush, roller or atomiser to a grease-free, clean and dry surface. Avoid direct sunlight.
Drying time: Dust-dry after 6 to 8 hours, fully dry after 12 to 24 hours. Further coats can be applied as required.
As with oiling and maintaining wood products, the coating must be checked regularly and, if necessary, the coating reapplied or supplemented depending on the weathering. This is the case when the surface no longer appears uniformly satin-matt.
It is suitable for application primarily on absorbent substrates. We do not recommend the application on bare sheet metal surfaces. The product is not suitable for use in areas constantly exposed to water (in well interiors).
The processing temperature should be between +5°C to +35°C.
Yield:
depending on the degree of rust 4 to 10 m² / litre.
The safety instructions and application instructions on the packaging and our product information must be observed.
detail.tabsContentTitle
| Accessories: | ROSTPROTECT |
|---|---|
| Mixed: | 480 ml |
Login