Set water trough AQUA LINEA semicircular 800 with inlet pipe and pump
Product number:
GA-230351-0500-0800
These are packing dimensions
Is produced for you, delivery time 21-28 Tage
Product information "Set water trough AQUA LINEA semicircular 800 with inlet pipe and pump"
Quality S355J2W+N
Material no. 1.8965
Surface optically pre-rusted on the visible sides
Complete fountain system
Water trough: Shape semicircular
Length: 800 mm
Width: 600 mm
Radius: R500 mm
Height: 500 mm
Top edge of water trough all-round 60 mm wide
Interior coating Water trough with high-quality, elastic, UV-stable, black and waterproof Gartenmetall®plastic coating
All corners and edges rounded, welded and ground flat
Keep water edge approx. 50 mm below OK
Water trough delivered in one piece, incl. base plate
Position prepare pump:
- in water trough (variant A)
Connection prepared for inlet pipe
Position: long front side
incl. 1x universal grommet prepared for cable feed-through and cable feed-through element
Position: base, corner, rear, left
incl. 1x universal grommet (surcharge) prepared for drain and sealing cover
Position: base, corner, rear, right
Foundation: on-site
With water troughs made of Corten steel, there is a certain amount of rust detachment of up to 0.05 mm of the surface, especially in the first few years. Plan the installation so that this rust can run off in a defined manner.
with fountain inlet pipe RAURIS - curved
Material no.:1.4301, V2A, surface ground K320
Inlet pipe diameter ø34 mm
Installation at the edge of the pool
Height: 400 mm
Length 1: 250 mm
Connection 1" internal thread
Delivery incl. cover rose ø60 mm and cover pipe ø60 mm. Cover rose ø60 mm and connection fitting for spiral hose 1" (ø25 mm).
for hole on pool edge ø42 mm
Note: Stainless steel must also be cared for. Please observe the care instructions for stainless steel, which can be downloaded from www.gartenmetall.de.
incl. pond pump
Rated pump capacity: 2,000 l/h
for installation in the water trough
Power connection 220 V
with 10 m cable and safety plug
(type CEE /4)
32 Watt
Make PONTEC
incl. Connection material for spiral hose 1" (ø25 mm)
Colour black, plastic
Note on water pump:
The water pump is not frost-proof and must therefore be protected from frost in winter.
Material no. 1.8965
Surface optically pre-rusted on the visible sides
Complete fountain system
Water trough: Shape semicircular
Length: 800 mm
Width: 600 mm
Radius: R500 mm
Height: 500 mm
Top edge of water trough all-round 60 mm wide
Interior coating Water trough with high-quality, elastic, UV-stable, black and waterproof Gartenmetall®
All corners and edges rounded, welded and ground flat
Keep water edge approx. 50 mm below OK
Water trough delivered in one piece, incl. base plate
Position prepare pump:
- in water trough (variant A)
Connection prepared for inlet pipe
Position: long front side
incl. 1x universal grommet prepared for cable feed-through and cable feed-through element
Position: base, corner, rear, left
incl. 1x universal grommet (surcharge) prepared for drain and sealing cover
Position: base, corner, rear, right
Foundation: on-site
With water troughs made of Corten steel, there is a certain amount of rust detachment of up to 0.05 mm of the surface, especially in the first few years. Plan the installation so that this rust can run off in a defined manner.
with fountain inlet pipe RAURIS - curved
Material no.:1.4301, V2A, surface ground K320
Inlet pipe diameter ø34 mm
Installation at the edge of the pool
Height: 400 mm
Length 1: 250 mm
Connection 1" internal thread
Delivery incl. cover rose ø60 mm and cover pipe ø60 mm. Cover rose ø60 mm and connection fitting for spiral hose 1" (ø25 mm).
for hole on pool edge ø42 mm
Note: Stainless steel must also be cared for. Please observe the care instructions for stainless steel, which can be downloaded from www.gartenmetall.de.
incl. pond pump
Rated pump capacity: 2,000 l/h
for installation in the water trough
Power connection 220 V
with 10 m cable and safety plug
(type CEE /4)
32 Watt
Make PONTEC
incl. Connection material for spiral hose 1" (ø25 mm)
Colour black, plastic
Note on water pump:
The water pump is not frost-proof and must therefore be protected from frost in winter.
detail.tabsContentTitle
Material: | Corten steel |
---|
Login
14 October 2024 11:42
Highlight im Garten
nicht so teuer wie die anderen Brunnen. Das Rohr wirkt hochwertig. Gut verpackt und 2 Wochen Lieferzeit.