Set water trough AQUA LINEA semicircular 800 with inlet pipe and pump

1.4404 V4A, rotex-ground

Fountain complete system

Water trough: Shape semicircular

Length: 800 mm
Width: 600 mm
Radius: R500 mm
Height: 500 mm

Top edge of water trough all-round 60 mm wide

Interior coating Water trough with high-quality, elastic, UV-stable, black and waterproof Gartenmetall® plastic coating

All corners and edges rounded, welded and ground flat

Keep water edge approx. keep water edge as far as possible approx. 50 mm below OK

Water trough delivered in one piece, incl. base plate

Position prepare pump:
- in water trough (variant A)

Connection prepared for inlet pipe
Position: long end face

incl. 1x universal bushing prepared for cable feed-through and cable feed-through element
Position: bottom, corner, rear, left

incl. 1x universal bushing (surcharge) prepared for drain and sealing cover
Position: bottom, corner, rear, right

Foundation: on-site

with fountain inlet pipe RAURIS - curved
Material no.:1.4301, V2A, surface polished K320
Inlet pipe diameter ø34 mm
Installation on the pool edge

Height: 400 mm
Length 1: 250 mm

Connection 1" internal thread
Delivery includes cover rosette ø60 mm and connection fitting for spiral hose 1" (ø25 mm).
for hole on pool edge ø42 mm

Note: Stainless steel must also be cared for. Please observe the care instructions for stainless steel, which can be downloaded from www.gartenmetall.de.

incl. pond pump
Rated pump capacity: 2,000 l/h
for installation in the water trough
Power connection 220 V
with 10 m cable and safety plug
(type CEE /4)
32 Watt
Make PONTEC
incl. Connection material for spiral hose 1" (ø25 mm)
Colour black, plastic

Note on water pump:
The water pump is not frost-proof and must therefore be protected from frost in winter.