Set water trough AQUA LINEA with water wall and pump

Quality S355J2W+N
Material no. 1.8965

Surface optically pre-rusted on the visible sides

With water troughs made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation so that this rust can run off in a defined manner.

Rectangular

Length: 1,500 mm
Width: 1.000 mm
Height: 500 mm

Top edge of water trough 60 mm wide, edged 20 mm inwards

Interior coating Water trough with high-quality, elastic, UV-stable, black and waterproof Gartenmetall® plastic coating

Prepare pump position:
- in water trough (variant A)

Connection prepared for water wall
Position: short side centrally

incl. 2x universal feed-through with cover, positions: 1x side panel, short side centrally, 1x base, front right

with 2x sealing covers (Art. No. GA-220076)

Water trough supplied in one piece

all corners and edges rounded, welded and ground flat

Water edge approx. 50 mm below OK

Foundation: on-site

with 1x water wall AQUA LINEA 600

Height: 1.100 mm
Width: 1,000 mm
Depth: 180 mm
Note: for trough height 500 mm

incl. water chute ISAR centrally
Width of water chute: 600 mm
Overhang: 45 mm
Height above water: 300 mm
Material of water chute Stainless steel
Material no. 1.4571, V4A, ground K320

incl. removable inspection opening at the rear

incl. water pump with ceramic shaft
Housing PVC black,
Spiral hose ø25 mm black,
incl. suitable screw connections
with Schuco plug to plug in

Pump capacity max. 5,000 l/h,
220 V connection, 10 m cable

Prepared for connection to water trough.
For description of position, see water trough

All corners and edges rounded, welded and ground flat
Water pump note:
The water pump is not frost-proof and must therefore be protected from frost in winter.