Source sphere AQUA GLOBE ø500/ ø800 TONGA
Product number:
GA-280330-0500-0800
These are packing dimensions
Available, delivery time: 14-21 Tage
matching Accessories
The following products can be directly added separately to the shopping cart
Product information "Source sphere AQUA GLOBE ø500/ ø800 TONGA"
Grade S355J2W+N
Material no. 1.8965
Source ball complete with water bowl WITHOUT SURFACE
Supplied completely functional including. GRP water collection basin, pump, flow regulator, matching hoses, fittings and LED lighting at the water outlet on the sphere
Source sphere
Diameter: ø500 mm
Water bowl design FLAT
Diameter: ø800 mm
Height: 80 mm
Water capacity approx. 20 litres
Top edge of water approx. 20 mm below OK water bowl
Incl. Base part for setting up the water bowl
The round geometry makes it easy and practical to align the water bowl
Pump capacity: 2.000 l/h
for installation in the water collection basin
Power connection 220 V
with 10 m cable and safety plug (2x)
(type CEE /4)
Colour black, plastic
incl. connection material for spiral hose 1" (ø25 mm)
LED source lighting incl. power supply unit and supply cable. Beam angle 180°. Protection class IP68, protection class power supply unit: IP 44. Voltage 12V/AC, power 1.6 Watt, power connection 220 V with 10 cable and safety plug (type CEE 7/4). Light colour warm white.
The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover that is supplied with the water collection basin and is included in the scope of delivery.
Material of water collection basin: GRP plastic
Material of cover: GRP plastic
Diameter: ø1,000 mm - of which approx. 90 mm rim all round
Height: approx. 350 mm
Water content max. 275 litres
Due to storage, there may be scratch marks in the bowl, which do not affect the stability and function
Surface on the visible sides visually pre-rusted
Note on rust detachment of the bowl:
Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer is formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.
ATTENTION: The balls are welded together from individual triangular plates. The welded seams remain visible even after they have been burnished. The balls are not technically round, only visually round.
Material no. 1.8965
Source ball complete with water bowl WITHOUT SURFACE
Supplied completely functional including. GRP water collection basin, pump, flow regulator, matching hoses, fittings and LED lighting at the water outlet on the sphere
Source sphere
Diameter: ø500 mm
Water bowl design FLAT
Diameter: ø800 mm
Height: 80 mm
Water capacity approx. 20 litres
Top edge of water approx. 20 mm below OK water bowl
Incl. Base part for setting up the water bowl
The round geometry makes it easy and practical to align the water bowl
Pump capacity: 2.000 l/h
for installation in the water collection basin
Power connection 220 V
with 10 m cable and safety plug (2x)
(type CEE /4)
Colour black, plastic
incl. connection material for spiral hose 1" (ø25 mm)
LED source lighting incl. power supply unit and supply cable. Beam angle 180°. Protection class IP68, protection class power supply unit: IP 44. Voltage 12V/AC, power 1.6 Watt, power connection 220 V with 10 cable and safety plug (type CEE 7/4). Light colour warm white.
The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover that is supplied with the water collection basin and is included in the scope of delivery.
Material of water collection basin: GRP plastic
Material of cover: GRP plastic
Diameter: ø1,000 mm - of which approx. 90 mm rim all round
Height: approx. 350 mm
Water content max. 275 litres
Due to storage, there may be scratch marks in the bowl, which do not affect the stability and function
Surface on the visible sides visually pre-rusted
Note on rust detachment of the bowl:
Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer is formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.
ATTENTION: The balls are welded together from individual triangular plates. The welded seams remain visible even after they have been burnished. The balls are not technically round, only visually round.
detail.tabsContentTitle
| Format: | Ø500 & Ø800 |
|---|---|
| Material: | Corten steel |
Login
Cladding for GRP water collection basin ø1000
Nr. GA-270384-1000
Format:
Ø1000
|
Material:
Corten steel
Quality S355J2W+NMaterial no. 1.8965For placing around the water collection basin. The cladding eliminates the need for digging.Top edge with ring edge 60 mmDiameter: ø1,100 mmHeight: 400 mmSurface on the visible sides optically pre-rusted