Tree bucket mobile GENF 2.0 x 2.0 m x 0.9 m
Product number:
UW-322-03-01-2000-2000-0900
Is produced for you, delivery time 28-35 Tage
Packing dimensions:
x x mm | 352 kg
matching Accessories
The following products can be directly added separately to the shopping cart


Product information "Tree bucket mobile GENF 2.0 x 2.0 m x 0.9 m"
Quality S355J2W+N
Material no. 1.8965
Square
Length: 2,000 mm
Width: 2.000 mm
Height: 900 mm
Top edge bevelled 60 mm / 20 mm wide
for high stability and visible rounded edge
without planting and filling
Tree container supplied in one piece
with stable base construction and water-permeable base (type 1)
incl. 4 lugs for crane transport and/or fastening of wood
The lugs are welded into the corners approx. 100 mm below the top edge. Drill hole for hooks for hanging: ø40 mm.
To protect the roots from frost and heat damage, the walls are lined with root insulation boards, thickness 20 mm, material polysterol hard foam (XPS), closed-cell and pressure-resistant.
Foundation: on-site
Surface on the visible sides optically pre-rusted
In the case of tree tubs made of Corten steel, a certain amount of rust detachment of approx. 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust can run off in a defined manner.
Options with additional prices:
Art. No. UW-478-02-M1000-1000
Additional price Type 2: Waterproof base with overflow pipe, height of coating: 100 mm. With overflow pipe in the base ø40 mm, 80 mm high, centred
(extra charge)
Art. No. UW-478-03-M1000-1000
Surcharge Type 3: Waterproof base with overflow pipe and intermediate base
Height of coating: 100 mm. With overflow pipe in the bottom ø40 mm, 80 mm high, in the middle. With intermediate bottom and watering pipe Ø65 mm, and level indicator. With water storage mats, 40 mm
(extra charge)
Art. No. UW-478-04-M1000-1000
Surcharge Type 4: Bollard barrier and fillable water tank
as mobile bollard barrier for temporary protection of events
The planters are equipped with a fillable water tank so that approx. 75% of the total volume can be filled with water on site. With water drain.
with waterproof tray and overflow pipe that can be emptied downwards past the water tank.
(extra charge)
Art. No: GA-18 00 24
Water storage mats (40 mm) to support the water supply (alternative to root insulation panels). 1 cm water storage mat corresponds to approx. 3 cm soil substrate. (extra charge)
Art. No.: UW-494-XX-1000
Forklift openings for mobile use. Width approx. 200 mm. Height approx. 150 mm. Centre distance according to specification sketch. (extra charge)
Art. No: UW-495-XX
Screens for forklift openings (4 pieces), fastening with two screws from below to protect against vandalism. (extra charge)
Art. No: UW-476-00-01-M1000
Lighting on the tree bucket in the side wall. Height from floor: 200 mm. Offset to the rear: 30 mm. (Surcharge)
Material no. 1.8965
Square
Length: 2,000 mm
Width: 2.000 mm
Height: 900 mm
Top edge bevelled 60 mm / 20 mm wide
for high stability and visible rounded edge
without planting and filling
Tree container supplied in one piece
with stable base construction and water-permeable base (type 1)
incl. 4 lugs for crane transport and/or fastening of wood
The lugs are welded into the corners approx. 100 mm below the top edge. Drill hole for hooks for hanging: ø40 mm.
To protect the roots from frost and heat damage, the walls are lined with root insulation boards, thickness 20 mm, material polysterol hard foam (XPS), closed-cell and pressure-resistant.
Foundation: on-site
Surface on the visible sides optically pre-rusted
In the case of tree tubs made of Corten steel, a certain amount of rust detachment of approx. 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust can run off in a defined manner.
Options with additional prices:
Art. No. UW-478-02-M1000-1000
Additional price Type 2: Waterproof base with overflow pipe, height of coating: 100 mm. With overflow pipe in the base ø40 mm, 80 mm high, centred
(extra charge)
Art. No. UW-478-03-M1000-1000
Surcharge Type 3: Waterproof base with overflow pipe and intermediate base
Height of coating: 100 mm. With overflow pipe in the bottom ø40 mm, 80 mm high, in the middle. With intermediate bottom and watering pipe Ø65 mm, and level indicator. With water storage mats, 40 mm
(extra charge)
Art. No. UW-478-04-M1000-1000
Surcharge Type 4: Bollard barrier and fillable water tank
as mobile bollard barrier for temporary protection of events
The planters are equipped with a fillable water tank so that approx. 75% of the total volume can be filled with water on site. With water drain.
with waterproof tray and overflow pipe that can be emptied downwards past the water tank.
(extra charge)
Art. No: GA-18 00 24
Water storage mats (40 mm) to support the water supply (alternative to root insulation panels). 1 cm water storage mat corresponds to approx. 3 cm soil substrate. (extra charge)
Art. No.: UW-494-XX-1000
Forklift openings for mobile use. Width approx. 200 mm. Height approx. 150 mm. Centre distance according to specification sketch. (extra charge)
Art. No: UW-495-XX
Screens for forklift openings (4 pieces), fastening with two screws from below to protect against vandalism. (extra charge)
Art. No: UW-476-00-01-M1000
Lighting on the tree bucket in the side wall. Height from floor: 200 mm. Offset to the rear: 30 mm. (Surcharge)
Form: | Quadratisch |
---|---|
Format: | H900 x W2000 x L2000 |
Material: | Corten steel |
Mixed: | mit Rand an der Oberkante |
Login