Water bowl AQUA BOWL 600F - TURIN
Product number:
GA-270342-0600
These are packing dimensions
Is produced for you, delivery time 14-21 Tage
matching Accessories
The following products can be directly added separately to the shopping cart
Product information "Water bowl AQUA BOWL 600F - TURIN"
Quality S355J2W+N
Material no. 1.8965
Spring fountain complete with noble water bowl and inlet pipe SURVIVAL
Delivery completely functional incl. water collection bowl, pump, matching hoses, fittings and inlet pipe
Material water bowl: Corten steel
Design: FLAT
Diameter: ø600 mm
Height: 50 mm
Water capacity: max. 10 litres
Incl. base part for setting up the water bowl.
The round geometry makes it easy and practical to align the water bowl.
Base part with inlet pipe made of stainless steel
Material no. :1.4301, tube gesch gesch geschlossene.:1.4301, tube ground
Diameter ø34 mm
Height: 400 mm
Depth: 250 mm
Connection 1" internal thread
Supplied with cover rose ø60 mm and connection fitting for spiral hose 1" (ø25 mm).
With extension arm
Pump capacity: 2.000 l/h
for installation in the water collection basin
Power connection 220 V with 10 m cable and safety plug (type CEE /4)
Colour black, plastic
incl. connection fitting for spiral hose 1" (ø25 mm)
The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover which is supplied with the water collection basin and is included in the scope of delivery.
Material of water collection basin: GRP plastic
Material of cover: GRP plastic
Diameter: ø1,000 mm - of which approx. 90 mm rim all round
Height: approx. 350 mm
Water capacity max. 275 litres
Due to storage, there may be scratch marks in the bowl, which do not affect the stability and function.
Surface on the visible sides visually pre-rusted
Note on rust detachment of the bowl:
Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer is formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.
Material no. 1.8965
Spring fountain complete with noble water bowl and inlet pipe SURVIVAL
Delivery completely functional incl. water collection bowl, pump, matching hoses, fittings and inlet pipe
Material water bowl: Corten steel
Design: FLAT
Diameter: ø600 mm
Height: 50 mm
Water capacity: max. 10 litres
Incl. base part for setting up the water bowl.
The round geometry makes it easy and practical to align the water bowl.
Base part with inlet pipe made of stainless steel
Material no. :1.4301, tube gesch gesch geschlossene.:1.4301, tube ground
Diameter ø34 mm
Height: 400 mm
Depth: 250 mm
Connection 1" internal thread
Supplied with cover rose ø60 mm and connection fitting for spiral hose 1" (ø25 mm).
With extension arm
Pump capacity: 2.000 l/h
for installation in the water collection basin
Power connection 220 V with 10 m cable and safety plug (type CEE /4)
Colour black, plastic
incl. connection fitting for spiral hose 1" (ø25 mm)
The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover which is supplied with the water collection basin and is included in the scope of delivery.
Material of water collection basin: GRP plastic
Material of cover: GRP plastic
Diameter: ø1,000 mm - of which approx. 90 mm rim all round
Height: approx. 350 mm
Water capacity max. 275 litres
Due to storage, there may be scratch marks in the bowl, which do not affect the stability and function.
Surface on the visible sides visually pre-rusted
Note on rust detachment of the bowl:
Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer is formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.
detail.tabsContentTitle
| Form: | With overflow |
|---|---|
| Format: | Ø600 |
| Material: | Corten steel |
Login
Cladding for GRP water collection basin ø1000
Nr. GA-270384-1000
Format:
Ø1000
|
Material:
Corten steel
Quality S355J2W+NMaterial no. 1.8965For placing around the water collection basin. The cladding eliminates the need for digging.Top edge with ring edge 60 mmDiameter: ø1,100 mmHeight: 400 mmSurface on the visible sides optically pre-rusted