Water bowl AQUA BOWL ROM overflowing as 3-fold cascade
Product number:
GA-270338-0600-1000-1400
Is produced for you, delivery time 21-28 Tage
Packing dimensions:
x x mm | 150 kg
matching Accessories
The following products can be directly added separately to the shopping cart

Product information "Water bowl AQUA BOWL ROM overflowing as 3-fold cascade"
Quality S355J2W+N
Material No. 1.8965
Spring fountain complete with noble water bowls SURPLUS with drip edge as cascade fountain
Supplied completely functional incl. Water collection bowls, pump, matching hoses, fittings and LED lighting at the water outlet
Material bowls: Corten steel
Design: FLAT
Diameter1: ø600 mm
Height: 50 mm
Water capacity: max. 10 litres
Diameter2: ø1,000 mm
Height: 110 mm
Water capacity: max. 40 litres
Diameter3: ø1.400 mm
Height: 180 mm
Water capacity: max. 80 litres
Incl. lower part and connecting piece for setting up the lowest water bowl.
The round geometry makes it easy and practical to align the water bowl.
Pump capacity: 11.000 l/h
for installation in the water bowl
220 V power connection with 10 m cable and shock-proof plug (type CEE /4),
colour black, plastic
incl. connection material for spiral hose 2" (ø51 mm)
LED source lighting S 2000 incl. power supply unit and supply cable. Beam angle 180°. Protection class IP68, protection class power supply unit: IP 44. Voltage 12V/AC, power 2.6 Watt, power connection 230 V with cable and safety plug (type CEE 7/4). Light colour warm white.
The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover that is supplied with the water collection basin and is included in the scope of delivery.
Material of water collection basin: GRP plastic
Material of cover: GRP plastic
Diameter: ø2,200 mm - of which approx. 110 mm rim all around
Height: approx. 600 mm
Water capacity max. 1.400 litres
Due to storage, there may be scratches in the pool, which do not affect the stability and function.
Surface on the visible sides visually pre-rusted
Note on rust detachment of the bowl:
Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer is formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.
Material No. 1.8965
Spring fountain complete with noble water bowls SURPLUS with drip edge as cascade fountain
Supplied completely functional incl. Water collection bowls, pump, matching hoses, fittings and LED lighting at the water outlet
Material bowls: Corten steel
Design: FLAT
Diameter1: ø600 mm
Height: 50 mm
Water capacity: max. 10 litres
Diameter2: ø1,000 mm
Height: 110 mm
Water capacity: max. 40 litres
Diameter3: ø1.400 mm
Height: 180 mm
Water capacity: max. 80 litres
Incl. lower part and connecting piece for setting up the lowest water bowl.
The round geometry makes it easy and practical to align the water bowl.
Pump capacity: 11.000 l/h
for installation in the water bowl
220 V power connection with 10 m cable and shock-proof plug (type CEE /4),
colour black, plastic
incl. connection material for spiral hose 2" (ø51 mm)
LED source lighting S 2000 incl. power supply unit and supply cable. Beam angle 180°. Protection class IP68, protection class power supply unit: IP 44. Voltage 12V/AC, power 2.6 Watt, power connection 230 V with cable and safety plug (type CEE 7/4). Light colour warm white.
The water collection basin is buried in the ground under the AQUA BOWL spring fountain. The water bowl stands on a cover that is supplied with the water collection basin and is included in the scope of delivery.
Material of water collection basin: GRP plastic
Material of cover: GRP plastic
Diameter: ø2,200 mm - of which approx. 110 mm rim all around
Height: approx. 600 mm
Water capacity max. 1.400 litres
Due to storage, there may be scratches in the pool, which do not affect the stability and function.
Surface on the visible sides visually pre-rusted
Note on rust detachment of the bowl:
Increased material removal in the water bowl is to be expected, especially until the final rust barrier layer is formed. This can also lead to blockage of the drain hole. It is therefore necessary to clean the bowl regularly during the rust-in phase so that the water can always drain off when the pump is switched off.
Format: | Ø600, Ø1000 & Ø1400 |
---|---|
Material: | Corten steel |
Login