Water Trough AQUA LINEA Cascade Fountain Left
Product number:
GA-230350-2000-1500-L
These are packing dimensions
Is produced for you, delivery time 7-14 Tage
Product information "Water Trough AQUA LINEA Cascade Fountain Left"
Quality S355J2W+N
Material no. 1.8965
as cascade fountain
Rectangular
Water trough 1
Length: 2,000 mm
Width: 500 mm
Height: 500 mm
Water trough 2
Length: 1.500 mm
Width: 500 mm
Height: 250 mm
Top edge of water trough 60 mm wide, folded 20 mm inwards
All corners and edges folded round, welded and ground flat
Water edge of trough 1: approx. 50-70 mm below top depending on pump setting
Water edge of trough 2: approx. 50 mm below top
Interior coating Water troughs with high-quality, elastic, UV-stable, black and waterproof Gartenmetall®plastic coating
Connection to trough1 prepared for water wall
AQUA LINEA with water chute 600 mm
in stainless steel V4A, projection 45 mm.
Position long side, central
incl. water trough lighting in the water trough GA-22 00 31-06 00
Height water trough: 1,100 mm
Width water trough: 1.000 mm
Depth of water wall: 180 mm
Height of water bowl: 300 mm above water level
incl. pump, in water wall (B) or externally in the garden
Pump AQUAMAX DRY 6000 from OASE
extra quiet, installed in the dry
220V connection, 10 m cable
incl. all necessary connection fittings. all necessary connection fittings
incl. spiral hose ø25 mm, 1",
length approx. 4 rm
Water trough 1:
incl. cascade overflow
stainless steel, ground K320
overflow height 70 mm below top of water trough
width: 300 mm
projection: 160 mm + 60 mm
position: short side left, central
incl. 2x universal feed-through art. No. GA-22 13 70 with cover Art. No. GA-220076
for drain or cable entry element Art. No. GA-22 00 28,
Position: floor, corner right
Water trough 2:
incl. universal grommet Art. No. GA-22 13 70, suction strainer Art. No. GA-22 00 77 and
with connection fitting for spiral hose ø25 mm (water circuit)
Position: floor, corner, front right
incl. overflow standpipe ArtNo. GA-22 13 19-250
Position: floor, corner, front left
Foundation on site
Surface on the visible sides visually pre-rusted
With water troughs made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust detachment can run off in a defined manner.
Material no. 1.8965
as cascade fountain
Rectangular
Water trough 1
Length: 2,000 mm
Width: 500 mm
Height: 500 mm
Water trough 2
Length: 1.500 mm
Width: 500 mm
Height: 250 mm
Top edge of water trough 60 mm wide, folded 20 mm inwards
All corners and edges folded round, welded and ground flat
Water edge of trough 1: approx. 50-70 mm below top depending on pump setting
Water edge of trough 2: approx. 50 mm below top
Interior coating Water troughs with high-quality, elastic, UV-stable, black and waterproof Gartenmetall®
Connection to trough1 prepared for water wall
AQUA LINEA with water chute 600 mm
in stainless steel V4A, projection 45 mm.
Position long side, central
incl. water trough lighting in the water trough GA-22 00 31-06 00
Height water trough: 1,100 mm
Width water trough: 1.000 mm
Depth of water wall: 180 mm
Height of water bowl: 300 mm above water level
incl. pump, in water wall (B) or externally in the garden
Pump AQUAMAX DRY 6000 from OASE
extra quiet, installed in the dry
220V connection, 10 m cable
incl. all necessary connection fittings. all necessary connection fittings
incl. spiral hose ø25 mm, 1",
length approx. 4 rm
Water trough 1:
incl. cascade overflow
stainless steel, ground K320
overflow height 70 mm below top of water trough
width: 300 mm
projection: 160 mm + 60 mm
position: short side left, central
incl. 2x universal feed-through art. No. GA-22 13 70 with cover Art. No. GA-220076
for drain or cable entry element Art. No. GA-22 00 28,
Position: floor, corner right
Water trough 2:
incl. universal grommet Art. No. GA-22 13 70, suction strainer Art. No. GA-22 00 77 and
with connection fitting for spiral hose ø25 mm (water circuit)
Position: floor, corner, front right
incl. overflow standpipe ArtNo. GA-22 13 19-250
Position: floor, corner, front left
Foundation on site
Surface on the visible sides visually pre-rusted
With water troughs made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust detachment can run off in a defined manner.
detail.tabsContentTitle
| Material: | Corten steel |
|---|
Login
14 October 2024 11:23
Hochwertiger Eindruck
Das Abladen mit der Hebebühne war problemlos, und die sichere Verpackung sorgte dafür, dass alles unversehrt ankam. Die Montageanleitung habe ich auf Nachfrage per E-Mail erhalten. Die leichten Plätschergeräusche des Brunnens sind angenehm und schaffen eine entspannte Atmosphäre.