Water Trough AQUA LINEA Cascade Fountain TRIBERG

Quality S355J2W+N
Material no. 1.8965

as cascade fountain (welded and ground in one piece)

Water trough 1 - weight approx. 170 kg
Square
Length: 1.300 mm
Width: 1,300 mm
Height: 750 mm

Water trough 2 - weight approx. 110 kg
L-shape
Length: 1,300 mm
Width: 1,300 mm
Height: 500 mm

Water trough 3 - weight approx. 80 kg
8-cornered
Length: 1,400 mm
Width: 1,400 mm
Height: 250 mm

Top edge of water trough 60 mm wide, folded 20 mm inwards

All corners and edges rounded, welded and ground flat

Incl. 5 eyelets (attached outside/bottom), for crane transport (can be flexed off)

Water edge of trough 1: approx. 50-70 mm below OK depending on pump setting
Water edge of trough 2: approx. 50-70 mm below OK depending on pump setting
Water edge of trough 2: approx. 50 mm below OK

Interior coating Water troughs with high-quality, elastic, UV-stable, black and waterproof Gartenmetall® plastic coating

Connection to trough1 prepared for water wall
AQUA LINEA with water chute 600 mm
in stainless steel V4A, SPECIAL projection 300 mm.
incl. LED lighting UNDER the water chute

Height of water wall: 1,800 mm
Width of water wall: 1.000 mm
Depth of water wall: 180 mm
Free-standing version with base plate, inspection opening on the side.

incl. pump, in water wall or externally in the garden
Pump AQUAMAX DRY 6000 from OASE
extra quiet, installed in the dry
Connection 220V, 5 m cable
incl. all necessary connection fittings

incl. spiral hose ø25 mm, 1",
length approx. 5 rm

incl. cascade overflow water trough 1
stainless steel, ground K320
overflow height 50 mm below top of water trough
width: 300 mm
projection: 80 mm
position: front left (overflow in trough 2)

incl. cascade overflow water trough 1 Cascade overflow water trough 2
Stainless steel, ground K320
Overflow height 50 mm below OK water trough
Width: 300 mm
Overhang: 80 mm
Position: Right side, front (overflow in trough 3)

Incl. universal grommet with
Connection fitting for spiral hose ø25 mm
Position in floor

Incl. 3x universal grommet in the base with cover as drain (1x per basin)

WITHOUT OVERFLOW STANDING PIPE

Foundation to be provided by customer

Surface visually pre-rusted on the visible sides

With water troughs made of Corten steel, a certain amount of rust detachment of up to 0.05 mm of the surface occurs, especially in the first few years. Plan the installation in such a way that this rust detachment can run off in a defined manner.